Soil Moisture Sensor Module consist of two probes which are used to measure the volumetric content of water. The two probes allow the current to pass through the soil and then it’s get the resistance value to measure the moisture value.
- Cable length:20 Cm
- Shipment weight:0.105 kg
- Shipment dimension:8*6*3 cm
- VCC= 5 V or 3.3 V. May be powered from a digital output pin on a uC
- GND= Ground, must be common with the uC
- D0= Digital output of comparator circuit. May be connected to uC or directly to a 5 V relay or similar device
- A0= Analog output usually connected to an analog input on uC.
- Biofuel study
- Erosion studies
- Dust Control
- Soil carbon sequestration studies
1 x Soil Moisture Detection Humidity Sensor