HOLTEK HT12E IC REMOTE CONTROL ENCODER

Fr 1,500.00

But your encoder IC should not communicate with someone else decoder IC, so an Encoder and Decoder IC pair will share a common Address which is an 8-bit data. So out of the 12-bits 8-bits will be used to set address and the remaining 4-bit will be used to transmit data.  With 4-bit data we can create 16 types (2^4 =16) of combinations.

Description

HT12E can be used only with its pair HT12D . These two ICs together form an Encoder and Decoder pair. They are 12-bit Encoders/Decoders, meaning they can transmit 12-bit a data among them.

Specifications

  • 12-bit Encoder IC to be used with  HT12D
  • Encoded data has 4 Data bits and 8 Address bits (8+4=12-bits)
  • Commonly used for RF and IR wireless transmission
  • Wide supply voltage range from 2.4V to 12V, typically 5V is used
  • Low stand by current of 0.1uA at Vcc=5V
  • Available in 16-pin DIP, 20-pin SOP

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Scroll to top
× May I assist you?